bettershot
Imaging Sys Accessories
TeleVue.com: Imaging Accessories > Imaging Sys Accessories > Imaging System Accessory Table
Imaging System Accessory Table

The following table indicates recommended use of Imaging System accessories with the Tele Vue "is" scopes, other Tele Vue scopes, and other-brand scopes. Click the item code for more information and see the Imaging System manuals for specific usage information. See important footnotes at table bottom.

Item CodeDescriptionTele Vue
NP-127is
Tele Vue
NP-101is
Tele Vue
Other
Other scopes
with 2inch focuser
Focal Path: Optical Accessories
LCL-1069Large Field Corrector, NP101/NP101is/NP127is
NPR-20730.8x Reducer for NP Scopes
NP101*
NP127*
RFL-40870.8x Reducer/Flattener for 102 Scopes
TV102
*
AFT-110548-mm Filter Adapter for 2.4"
*
*
Focal Path: System Conversion
RAD-1074Imaging System Nosepiece for 2" Focuser
A2A-11072.4" Adapter for 2" Accessories
*
*
Focal Path: Camera Adapters
TRG-1072Standard T-Ring Adapter for 2.4"
*
*
CWT-2070Canon Wide T Adapter w/Bayonet for 2.4"
*
*
NWT-2073Nikon F Wide T Adapter w/Bayonet for 2.4"
*
*
M54-1073M54 Camera Adapter for 2.4"
*
*
STL-1071SBIG STL Camera Adapter for 2.4"
*
*
Focal Path: Extension
TLF-00400.040" (1mm) Long Accessory Tube for 2.4"
*
*
TLG-00800.080" (2mm) Long Accessory Tube for 2.4"
*
*
TLA-02500.25" (6.4mm) Long Accessory Tube for 2.4"
*
*
TLB-03750.375" (9.5mm) Long Accessory Tube for 2.4"
*
*
TLC-05000.50" (12.7mm) Long Accessory Tube for 2.4"
*
*
TLD-10001.0" (25.4mm) Long Accessory Tube for 2.4"
*
*
TLS-1121Set of 2 (TLF+ TLG) Accessory Tubes for 2.4"
*
*
TLS-2245Set of 6 Accessory Tubes for 2.4"
*
*
Mount Rings
MRS-4011Mt. Rng Set for 4” dia. Tube (inc. BPL-1098)
NP101
TV102
MRS-5000Mt. Rng Set for 5" dia. Tube (inc. BPL-1098)
NP127
Focuser: Fine Focus
FDF-2004FocusmateDriver10:1
Item CodeDescriptionTele Vue
NP-127is
Tele Vue
NP-101is
Tele Vue
Other
Other scopes
with 2inch focuser

Table Footnotes
*Scopes with 2" focusers will require the RAD-1074 accessory to accept 2.4" Imaging System accessories. Imaging System accessories used with 2" focusers may not provide the large field illumination found in the 2.4" focusers of "is" scopes.

The "is" scopes include Focusmate installed on the focuser.


Imaging System Accessories Chart

Here are images and descriptions of the Imaging System accessories in the same order as the table above. Refer to table for telescope compatibility, other required parts, and notes, then read the summary description below. For more information, refer to informational links at bottom or call us.

Focal Path: Optical Accessories
Optical accessories in the Imaging System optimize the image for specific applications.
LCL-1069: Large Field Corrector, NP101/NP101is/NP127is   top
• The Large Field Corrector optimizes images at the edge of field when imaging through the Tele Vue-NP101, NP101is and NP127is telescopes. Recommended for cameras with diagonal sizes larger than APS format or in all sensor formats when the sensor pixels are < 6 µm. See telescope manual for backspacing. For non Imaging System Tele Vue-NP101 use 77.3mm +/- 1.6mm.
NPR-2073: 0.8x Reducer for NP Scopes   top
• A reducer has the optical property of decreasing the effective focal length of the telescope. Reduced focal length results in wider-field and faster imaging time on nebulae and galaxies. The NPR-2073 0.8x Reducer for NP Scopes was specifically designed to be used with the NP127is and NP101is. While it can also be used to enlarge the field of other Tele Vue Petzval type telescopes, it will not provide additional correction for those models. This reducer was designed to minimize vignetting with camera sensors up to 43mm diagonal (Full Frame) and is a replacement for the previous 0.8x reducer, the NPR-1073, which worked best up to APS-C sensors. When combined with a Tele Vue Petzval type telescope, it reduces the focal length of the telescope by 20% and increases the telescope's field of view by 25%. See instructions for back focal length spacing details.
RFL-4087: 0.8x Reducer/Flattener for 102 Scopes   top
• Flatteners clean-up focus away from the center of an image. The 0.8x Reducer/Flattener for 102 Scopes reduces telescope focal length to 80% while flattening the field for up to 35mm frame formats. Although optimized for TV102 scopes, it also works with any non-flat-field refractors (such as doublets or triplets) from 800-1000mm focal length.
AFT-1105: 48-mm Filter Adapter for 2.4"   top
• Imaging System 48mm Filter Adapter allows use of 48mm filters in optical-train and takes up 0.25” / 6.4mm of spacing. Best if used closest to the chip to minimize any vignetting.
 
Focal Path: System Conversion
These conversion parts allow Imaging System accessories to attach to scopes with 2" focusers and connect 2" and SCT accessories to Imaging System parts.
RAD-1074: Imaging System Nosepiece for 2" Focuser   top
• This is a key component to the imaging system's versatility on non-"is" scopes. By placing the Imaging System Nosepiece for 2" Focuser in your standard 2" drawtube, you open up your telescope to accept the 2.4" Imaging System accessories and take advantage of the solid threaded connection. Take up 0.12" / 3mm of back focus when fully inserted.
A2A-1107: 2.4" Adapter for 2" Accessories   top
• 2.4" Adapter for 2" Accessories is another key component that expands the usability of your existing 2" accessories. The adapter allows any 2” accessory to connect to the Imaging System. This includes cameras and filter wheels with 2" nosepieces. This adapter includes dual thumb-screws and non-marring brass clamp ring. Takes up 1.2" / 30.5mm of path length.
 
Focal Path: Camera Adapters
Camera adapters connect to the back of all focal path accessories and provide a place to attach the camera.
TRG-1072: Standard T-Ring Adapter for 2.4"   top
• Standard T-Ring Adapter for 2.4" provides a standard T-ring thread to attach your camera too. Recommended for cameras with APS-size or smaller chips. Takes up 0.26" / 6.6mm of path length when connected to other Imaging System accessories.
CWT-2070: Canon Wide T Adapter w/Bayonet for 2.4"   top
• Canon EOS cameras are popular with astro-imaging enthusiasts. But, the typical T-ring / telescope setup does not take advantage of the wide aperture of the Canon bayonet mount: significant vignetting is caused by the constriction of the T-ring opening. Canon Wide T Adapter with Bayonet for 2.4" connects to your EOS in place of the T-ring and provides 25% greater aperture to minimize vignetting.
NWT-2073: Nikon F Wide T Adapter w/Bayonet for 2.4"   top
• Nikon cameras are popular with astro-imaging enthusiasts. But, the typical T-ring / telescope setup does not take advantage of the wide aperture of the bayonet mount: significant vignetting is caused by the constriction of the T-ring opening. Nikon F Wide T Adapter with Bayonet for 2.4" connects to your Nikon F-mount camera in place of the T-ring and provides 13% greater aperture to minimize vignetting. Can be used with Nikon Z-series mirrorless cameras using an F-to-Z adapter (FTZ) available at camera stores.
M54-1073: M54 Camera Adapter for 2.4"   top
• This has an M54 x 0.75mm male thread on one side and our 2.4" imaging system thread on the other. This is useful for connecting M54 threaded accessories to Tele Vue imaging system. Takes up 0.26" / 6.6mm of path length when connected to other Imaging System accessories.
STL-1071: SBIG STL Camera Adapter for 2.4"   top
• SBIG STL Camera Adapter for 2.4" threads directly onto the STL11000. Takes up 0.26" / 6.6mm of path length when connected to other Imaging System accessories.
 
Focal Path: Extension
Focuser extensions of various lengths are often used to create the necessary distance for proper spacing of field lenses to imager; the required distance will vary depending on camera specifications. All are black anodized aluminum with anti-reflection threads for maximum contrast.
TLF-0040: 0.040" (1mm) Long Accessory Tube for 2.4"   top
• 0.040" (1mm) Long Accessory Tube for 2.4" adds 0.040" (1mm) extension between Imaging System accessories.
TLG-0080: 0.080" (2mm) Long Accessory Tube for 2.4"   top
• 0.080" (2mm) Long Accessory Tube for 2.4" adds 0.080" (2mm) extension between Imaging System accessories.
TLA-0250: 0.25" (6.4mm) Long Accessory Tube for 2.4"   top
• 0.25" Length Accessory Tube for 2.4" adds 0.250" (6.4mm) extension between Imaging System accessories.
TLB-0375: 0.375" (9.5mm) Long Accessory Tube for 2.4"   top
• 0.375" Length Accessory Tube for 2.4" adds 0.375" (9.5mm) extension between Imaging System accessories.
TLC-0500: 0.50" (12.7mm) Long Accessory Tube for 2.4"   top
• 0.50" Length Accessory Tube for 2.4" adds 0.500" (12.7mm) extension between Imaging System accessories.
TLD-1000: 1.0" (25.4mm) Long Accessory Tube for 2.4"   top
• 1.0" Length Accessory Tube for 2.4" adds 1.000" (25.4mm) extension between Imaging System accessories.
TLS-1121: Set of 2 (TLF+ TLG) Accessory Tubes for 2.4"   top
• Set of 2 Accessory Tubes is a convenient set of the 1mm & 2mm spacers described above. This allows great versatility in achieving the necessary distance for proper spacing of field lenses to image plane.
TLS-2245: Set of 6 Accessory Tubes for 2.4"   top
• Set of 6 Accessory Tubes is a complete set of the tubes/spacers described above. This allows great versatility in achieving the necessary distance for proper spacing of field lenses to image plane.
 
Mount Rings
Mount Rings attach Tele Vue telescope to your mount. Our dual rings each have bat-handle locks, and two Tele Vue accessory slots for ring-mounted accessories such as Starbeam, Sol-Searcher, Piggy-Cam and others. The adjustable top plate is for spacing the ring set and adding additional accessories. Bottom of each ring is drilled for ¼"-20 hardware.
MRS-4011: Mt. Rng Set for 4” dia. Tube (inc. BPL-1098)   top
• Mount Ring Set for 4” Diameter Tube provides a rigid means of holding any 4" diameter telescope tube. The individual rings can be spaced any distance apart or from 5.5" to 6.5" apart with the accessory bar or bottom plate attached. This flexibility allows the Mount Ring Set to accommodate a variety of mounts. Each ring has two accessory channels with #10-32 tapped holes, and a #¼"-20 tapped hole on the top and bottom to accept the accessory bar, bottom plate, a stud or bolt as necessary. The accessory bar has a variety of holes to accept Tele Vue Starbeam and even a slot with which you can piggyback a smaller Tele Vue refractor. The included bottom plate (BPL-1098) is drilled to mate to a variety of mounts or mounting adapter plates - including the Tele Vue/Vixen Mount Adapter (AVT-1011) and Tele Vue Gibraltar-5 Head.
MRS-5000: Mt. Rng Set for 5" dia. Tube (inc. BPL-1098)   top
• Mount Ring Set for 5" Diameter provides a rigid means of holding any 5" diameter telescope tube. The individual rings can be spaced any distance apart or from 5.5" to 6.5" apart with the accessory bar or bottom plate attached. This flexibility allows the Mount Ring Set to accommodate a variety of mounts. Each ring has two accessory channels with #10-32 tapped holes, and a #¼"-20 tapped hole on the top and bottom to accept the accessory bar, bottom plate, a stud or bolt as necessary. The accessory bar has a variety of holes to accept Tele Vue Starbeam and even a slot with which you can piggyback a smaller Tele Vue refractor. The included bottom plate (BPL-1098) is drilled to mate to a variety of mounts or mounting adapter plates - including the Tele Vue/Vixen Mount Adapter (AVT-1011) and Tele Vue Gibraltar-5 Head.
 
Focuser: Fine Focus
These accessories are a must for accurate image focusing.
FDF-2004: FocusmateDriver10:1   top
• Focusmate Driver, designed for scopes with black pinion bodies (click image left or see instructions). Works on the following scopes: larger scopes with the following serial #s and higher: TVNP-127is (#1175), TVNP-101is (#1227), & TVNP101 (#1982); TV-76 and TV-85 that came with Focusmate 10:1 standard. Permits vibration-free, variable-speed, electronic motor control of the 10:1 Focusmate Fine Focus Accessory. A tap on the button permits vibration-free focusing in steps as small as approximately 0.0005". Switching between manual and motor focus is easily done with a unique quick disconnect that doesn't require tools.

Copyright © 2003-2024 Tele Vue Optics, Inc., 32 Elkay Dr, Chester, NY, 10918 · Call for advice: 1-845-469-4551 (9am-4:30pm ET) · TeleVue.com · Privacy Policy